DIY Guitar Messing About (2 Viewers)

[JohnnyRaz]

i have an (IIRC) 9.5" radius sanding block if you need one. i just need to find the fucker.

Thanks - this has as flat fingerboard… standard enough for mandolins-bouzoukis…

 

[JohnnyRaz]

how I learned the locking mechanism on my newish router isn’t 100% reliable!

 

[seanc]

apparently one option would be to remove the other strings and push it out from inside the body. i'll try that later.

That's what I've done in the past, but I've only done it on your typical acoustic. I can't see what you've got there.

And since you're going to probably going to change the strings anyway...

 

[magicbastarder]

Yeah, there's nothing like an 'oh shit' moment like an 'oh shit' router moment. You're so close to disaster so much of the time. I've had several near misses with them.

I jinxed you

 

[JohnnyRaz]

I jinxed you

Ha! Yeah, was using a bit with a top bearing so applying a bit of pressure into the wood. I’ll be fairly contouring the body at that point, so I may be able to take it out more or less. If not a repair piece and a solid finish!

 

[JohnnyRaz]

I have a heroic amount of rasping and sanding ahead to tidy up and contour the body, but it’s coming together!

 

[seanc]

A very sad friend told me last night that he'd snapped the neck on his guitar. At the headstock. I told him I'd look at this thread. He "loved that guitar, man". I loved that guitar and I've never even touched it.


Is there any hope?

 

[JohnnyRaz]

A very sad friend told me last night that he'd snapped the neck on his guitar. At the headstock. I told him I'd look at this thread. He "loved that guitar, man". I loved that guitar and I've never even touched it.


Is there any hope?

Have a photo? There’s always hope (mostly)

 

[seanc]

I'll ask when I see him again. He was in the grieving process last night so I didn't ask.

 

[magicbastarder]

les pauls are famous for snapping at the headstock; the edge's explorer broke once, possibly twice, and was repaired. they can be repaired, but i couldn't guess the cost.

 

[JohnnyRaz]

Fretting in progress - for my fourth instrument to fret I’ve treated myself to a proper flush nippers. Life changing.

 

[Space]

My SG Standard has had it's neck snapped multiple times. Looking at 1-200 euro repairs cost. Maybe more being in London. Providence Guitars do amazing work over that way so worth giving them a shout.

 

[magicbastarder]

I may be spending (or committing to spend) a lot of money on a lathe tomorrow. I better get the fucking use out of the thing if I do.

 

[JohnnyRaz]

I may be spending (or committing to spend) a lot of money on a lathe tomorrow. I better get the fucking use out of the thing if I do.

Presuming it’s a fancier lathe than you’re current one?

 

[magicbastarder]

Just a lot bigger basically. Proper 'see me through till I'm dead' vibes.

 

[magicbastarder]

right, i'm €2.5k lighter and about 300kg heavier this evening.

 

[magicbastarder]

i got a ten year old version of this; branded jet though (jet and powermatic are essentially the same company) so thankfully it's not the gank colour shown here:

Powermatic 3520C Woodturning Lathe available online - The Carpentry Store

 

[JohnnyRaz]

i got a ten year old version of this; branded jet though (jet and powermatic are essentially the same company) so thankfully it's not the gank colour shown here:

Powermatic 3520C Woodturning Lathe available online - The Carpentry Store

Will you need a bigger shed?

 

[magicbastarder]

everyone needs a bigger shed.

 

[JohnnyRaz]

Onto the drilling holes in it stage now.
Small matter of a bridge and nut to make also before I can give it a pre-finishing test drive